People who know about Microtech ECU's

SPK-250 · 26-07-2007, 02:27 AM

If a Microtech MTX-8 sequential fire ECU has been on a SR20 running would it be hard to do the wiring for a 250 x-flow??

Cheers.
Shane-o

Ghiadude · 26-07-2007, 08:28 AM

It can run a 6 cyl in waste spark config only. It will have to be totally rewired...and it will need to be sent to microtech to have its config changed. I dont know if these are still supported. In my humble opinion it wouldnt be worth it. Theres alot better ECU's out there. Microtech do have a support forum HERE
http://www.microtechefi.com/forum/

prydey · 26-07-2007, 02:38 PM

i'm running a lt8 in my 5.0 eb. i don't know much about them at all which is why i go to boostworx at panorama for all my tuning/wiring needs. speak to shaun. tell them rob said to call. there's not much he doesn't know and he's a top bloke. always looks after me well and gives me the time of day whenever i call past regardless of what he's up to.

if he can't help or if that ecu is no good he should be able to offer alternatives. he deals a lot with microtech though as his main work is skylines and a few rotors which run pretty well with microtech.

SPK-250 · 26-07-2007, 03:18 PM

Yeah Shaun is a good bloke. He's done a few cars for mates of mine. Bugger it i think i'm just going to use the carb and blow through for the time being.