|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
10-10-2009, 02:35 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
|
ehy guy few months ago i decided to glue my roof liner back up to the car, now becuase it was summer it has melted all over my rear windscreen and is a paint to remove,
any recomendations on how to remove it off the glass any products which work cheers
__________________
Welder/Fabricator at Beaudesert Exhuast Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors |
||
|
|
|
10-10-2009, 02:39 PM
|
#2 | ||
|
Resident AFF detailer
Join Date: Dec 2008
Location: Melbourne, VIC
Posts: 3,730
|
Get some Wax & Grease Remover.....or use some mineral Turps, or Prepsol.
And a paint scraper...
__________________
No longer an 'active' detailer. |
||
|
|
|
|
10-10-2009, 02:49 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
|
oh really dont want to use a paint scraper as i dont want to scratch the window, but i will give the wax and grease remover a go, thanks
__________________
Welder/Fabricator at Beaudesert Exhuast Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors |
||
|
|
|
|
11-10-2009, 08:11 AM
|
#4 | ||
|
Resident AFF detailer
Join Date: Dec 2008
Location: Melbourne, VIC
Posts: 3,730
|
if it's a brand new scraper, you wont scratch the window.....I used one to remove all the leftover gunk on the rear windscreen after removing the factory phone kit.....came up beautifully, not a mark left!!
The trick is to go SLOWLY.......don't force / push too hard!!!
__________________
No longer an 'active' detailer. |
||
|
|
|
|
11-10-2009, 08:49 AM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
|
thanks i wil go to day and get some wax and grease remover, i got half done other day, i used the thing they have at the servos to do clean your windscreen with, sprayed window cleaner on it, let is soak then i go in there and rubbed and rubbed managed to get 50 percent off, got bored after lollol
if i were to get the windows tinted, would they remove it for me
__________________
Welder/Fabricator at Beaudesert Exhuast Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors |
||
|
|
|
|
11-10-2009, 12:03 PM
|
#6 | ||
|
Resident AFF detailer
Join Date: Dec 2008
Location: Melbourne, VIC
Posts: 3,730
|
probably....ask them!!!
But not that hard to DIY. If window cleaner worked for you, then something like turps or even Methylated Spirits would definately work. Wax & Grease remover FTW though.
__________________
No longer an 'active' detailer. |
||
|
|
|
|
11-10-2009, 12:47 PM
|
#7 | ||
|
moderator ford coupe club
Join Date: Jun 2007
Posts: 6,640
|
i am not sure what type of glue it is, but have you tried a hair dryer to heat it slightly and soften it
|
||
|
|
|
|
11-10-2009, 03:48 PM
|
#8 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
|
yeh i will try some
__________________
Welder/Fabricator at Beaudesert Exhuast Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors |
||
|
|
|
|
11-10-2009, 05:31 PM
|
#9 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2008
Posts: 1,131
|
Metho and a razorblade. Will get it off no drama's and not scratch.
__________________
GT 335 11.3@124.1mph 383rwkw/513rwhp Forced Performance Tuned |
||
|
|
|
|
03-11-2009, 10:24 AM
|
#10 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2009
Location: jimboomba
Posts: 4,638
|
got thge glue off on the weekend used turps and a dish washing sponge and slowly rubbed it off, and got it all off cheers
__________________
Welder/Fabricator at Beaudesert Exhuast Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors |
||
|
|
|
Removal Of Glue On Rear Windscreen
Hybrid Mode