|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
12-04-2013, 10:11 PM
|
#1 | ||
|
Regular Member
Join Date: Aug 2007
Posts: 55
|
I have just started a power window upgrade in my ute and need some help with the wiring, I don't have power (12v) to the relay (pin 85), now I have a parts car which I'm using and when I traced it I found it comes out of the blue plug (back of fuse panel) which then goes to the BCM is this right or did I stuff up? If I'm right how do I get around it, I would like to use the fuse panel for the relay if I can?
Thanks |
||
|
|
|
14-04-2013, 02:15 PM
|
#2 | ||
|
Got Ghia?
Join Date: Jul 2006
Location: Perth
Posts: 999
|
Traditionally Pin 85 is earth.
Colours according to manual (if you trust that!) Power to pins 86 and 30 from 30amp C/B in fuse box. Brown/pink wire to BCM from 85 Grey/yellow from 87 off to your power window switches
__________________
2007 BF MKII Ghia V8 - BA GT Exhaust| F6 Intake | Superlows | 19" GT-P's | 30mm Swaybar | - Sold  2002 AU2 XR8 Ute - Manual | Leather | Injected LPG | Pacemakers |
||
|
|
|
|
14-04-2013, 08:16 PM
|
#3 | ||
|
Regular Member
Join Date: Aug 2007
Posts: 55
|
Thanks Gav
Will need to check it out tomorrow But if I run a wire to the BCM will I need to take it to ford to be reprogrammed? |
||
|
|
|
|
15-04-2013, 08:00 PM
|
#4 | ||
|
Got Ghia?
Join Date: Jul 2006
Location: Perth
Posts: 999
|
I don't think you can just run a wire to the BEM, you'd need a BEM that has power window control.
In _theory_ you should just be able to earth pin 85 and the windows will work, but you won't get any of the controls the BEM offers, however I have not checked what the exact BEM funtions for the power windows is on the AU.
__________________
2007 BF MKII Ghia V8 - BA GT Exhaust| F6 Intake | Superlows | 19" GT-P's | 30mm Swaybar | - Sold 2002 AU2 XR8 Ute - Manual | Leather | Injected LPG | Pacemakers |
||
|
|
|
|
16-04-2013, 08:13 AM
|
#5 | ||
|
Regular Member
Join Date: Aug 2007
Posts: 55
|
I spoke to an auto electrician yesterday and he said the same, just earth it, so I have them working
|
||
|
|
|
Power windows
Hybrid Mode