|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
03-05-2020, 09:02 PM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2019
Posts: 4
|
I m replacing the clock spring on my AU1..due to the horn not working from the pad..and cruise control illuminating on the dash but not functioning. just wondering if there are any precautions that need to be followed fitting a clock spring?
|
||
|
|
|
11-05-2020, 09:14 PM
|
#3 | ||
|
Starter Motor
Join Date: Feb 2019
Posts: 4
|
I purchased a used clock spring for $55 from a wrecker.. once fitted the horn and cruise now function.
|
||
|
|
|
| 4 users like this post: |
|
15-08-2020, 03:57 PM
|
#4 | ||
|
Ford T3 Partsologist
Join Date: May 2010
Location: Morawa W.A.
Posts: 988
|
I need to do the same but the WM has no instruction on removing the steering wheel only ref to making sure to disarm air bag which ive done
Do i need to secure column to undo the steering wheel torx bolt, as its tight the wheel is moving as i try and undo the bolt any info would be helpful Thanx in advance
__________________
 2002 Blueprint T3 TE50 Manual Koni Suspension # 161  T-Series Club of Australia - www.tseriesclub.org
|
||
|
|
|
|
15-08-2020, 06:48 PM
|
#5 | ||
|
Ford T3 Partsologist
Join Date: May 2010
Location: Morawa W.A.
Posts: 988
|
All good got the bolt undone spent all arvo trying to budge wheel of by whacking and rocking etc will not budge so used a puller still wont budge hahahaha its just peeled the alloy away from the centre now im really in trouble if anyone can help can you give me a call on 0439 711 028 coz i have no idea how this going to come off now - its a T3 momo steering wheel
Thanx Darren
__________________
2002 Blueprint T3 TE50 Manual Koni Suspension # 161 T-Series Club of Australia - www.tseriesclub.org
|
||
|
|
|
AU Clock spring.
Hybrid Mode