|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
|
Thread Tools | Display Modes |
|
09-01-2006, 04:11 PM | #1 | ||
White Lightning
Join Date: Dec 2004
Posts: 1,870
|
i need to replace my fluid since its boiled a couple of times and is quite dark now. i got my moneys worth out of it but i really do give the braking system a flogging almost daily.
ive got some new EBC greenstuff pads to replace the worn out advance's and i need new fluid to compliment these pads. what i need to know is, does the falcon manual [xr6] specify a mineral fluid to be used? if not i think i can go with some 5.1 stuff like castrol SRF or motul 5.1, or am i wrong? i remember hearing somewhere you cant use dot5.1 in eseries falcons. |
||
10-01-2006, 10:20 AM | #2 | ||
FF.Com.Au Hardcore
Join Date: Apr 2005
Location: Bundaberg
Posts: 604
|
I think you have to replace ALL the rubber components ie seals,cups & O rings to use that type of brake fluid (Silicon??) because it reacts with the usual type and the rubbers swell up.(Not 100% sure but phone a brake speciaist)
|
||
10-01-2006, 02:33 PM | #3 | ||
Number 5 is alive!
Join Date: Dec 2004
Location: Melbourne, Vic
Posts: 3,438
|
The XR6 uses the same fluid as the rest of the Falcon range.
Honestly dont waste your money on 5.1, unless you intend on doing track days, even the a good quality DOT 4 will be more than adaquate with your stock brakes. Greenstuff are an awsome pad. Ohh and your fluid should be replaced at least every two years. I do mine every 12 months. :P
__________________
Kerry Tickford wings are for Tickford cars! "Experimental Racer" #6 1994 Gunmetal XG XR6 1997-1999 [B][COLOR=Red] 1994 Le Mans Red ED 2008 MA XR5 Mondeo 2015 VOLVO V60 T6 R-DESIGN-POLESTAR Enhanced |
||
10-01-2006, 03:42 PM | #4 | ||
White Lightning
Join Date: Dec 2004
Posts: 1,870
|
ok its like this, my braking system is far from stock. ive got dba slotted rotors up front and solids round the back. bendix advance all round. i killed the front rotors once already and replaced with another set of slotted, but now the advance are done up front. and there are times, on a weekly basis, that i drive 'track day' hard. i really need as good as i can get since pointing at a hairpin at 80km with little room to pull up can happen.
|
||
10-01-2006, 03:55 PM | #5 | ||
FF.Com.Au Hardcore
Join Date: Aug 2005
Location: Northern Tablelands
Posts: 940
|
slow down a bit earlier,,
__________________
2000 AU Wagon |
||
10-01-2006, 04:24 PM | #6 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Sth East Melb
Posts: 2,357
|
If your still running the standard calipers your braking system is pretty stock. Maybe look at upgrading to larger calipers ? There are a few guys with eseries that have upgraded. It aint cheap though. The standard Eseries brakes are crap. Im also running slotted rotors and they dont make much difference over standard. If i was you, and punished your brakes as much as you say. Id look at getting a decent setup.
__________________
Heritage Green EL Ghia Black AUII XR8 Ute |
||