Tickle an ST170

XP6 · 08-11-2006, 04:24 AM

Been a while since my last post!

Now my shopping trolley has expired warrantee, what can I do it without spending much mulla to extract a bit more go?(its still totaly standard, 55K old)
Can anyone flash the standard computer for more go yet, or will a piggyback chip be needed?
Intake mods are they worth it?

photn · 08-11-2006, 08:33 AM

ummm try

www.pumaspeed.co.uk

they have a whole lot of performance mods some expensive and some cheap.....

but a blue fin or a superchip thingy maboby should give you a little more power at not that much of a cost....

FOCUSonTHIS · 08-11-2006, 09:39 AM

Bluefin flash the current ecu.

raymon81 · 08-11-2006, 11:34 AM

http://www.european-parts.net/catalo...roducts_id=560

similar thing to the bluefin

XP6 · 08-11-2006, 05:13 PM

So a Big Throttle Body for Focus ST170 and a SCT XCalibrator 2 for ST170 should give me between 12~15kw gain for abouts $1250.
Sound reasonable?
Reckon Id get hit with importing cost's, should I import them separately?(or are they available localy?)
Would modding the standard air box assembly with a pod filter inside it gain me much... or **** it off altogether?

I'd like to get close to 100FwKw had it dyno'ed before she clocked 82FwKw on crap fuel... wana show up some gen3 heads!
The same day we dynoed some bikes... a HAYABUSA cracked 118rwkw, then a racing Kwaka 1000 pulled 125rwkw.
The best was a very standard looking XR6T MKII, 1st run 225rwkw... flashed the comp... 2nd run 335rwkw!(yes its not stock)

photn · 08-11-2006, 06:59 PM

Quote:

Originally Posted by ST170ish

So a Big Throttle Body for Focus ST170 and a SCT XCalibrator 2 for ST170 should give me between 12~15kw gain for abouts $1250.
Sound reasonable?
Reckon Id get hit with importing cost's, should I import them separately?(or are they available localy?)
Would modding the standard air box assembly with a pod filter inside it gain me much... or **** it off altogether?

I'd like to get close to 100FwKw had it dyno'ed before she clocked 82FwKw on crap fuel... wana show up some gen3 heads!
The same day we dynoed some bikes... a HAYABUSA cracked 118rwkw, then a racing Kwaka 1000 pulled 125rwkw.
The best was a very standard looking XR6T MKII, 1st run 225rwkw... flashed the comp... 2nd run 335rwkw!(yes its not stock)

im not sure..but i dont think there is much you can do to the focus ST170...

um pod filter will not give you more HP in itself...a COLD AIR INTAKE will give you a slight increase....

have a look into extractors and cams....just see if you can get any gain out of those....if you can get a gain from them as in a fair gain then get an ECU edit....a bluefin will not get the best performance out of the mods.....

zetec · 08-11-2006, 08:18 PM

Quote:

Originally Posted by ST170ish

I'd like to get close to 100FwKw had it dyno'ed before she clocked 82FwKw on crap fuel... wana show up some gen3 heads!

Damn I cranked 76.7kw in my stock Zetec at the wheels... must have been REALLY crap fuel.

All you need is a K&N, a flash tune and a free flowing exhaust, you'll be loving it.

orsest170 - now orsexr5 had an ST that was almost as quick as his XR5T... ask him, he seemed to have the quickest one.

XP6 · 08-11-2006, 10:16 PM

Talkin with my dyno guy, he reckoned the exhaust on the st is very good to start with, aftermarket system gains would be very little, change the cat "could" help a little he said.
So has anyone fitted one of these bigger TB's or the SCT XCalibrator?

Zetec consider a stock VZ auto only got 93 on that day, and a worked 318 bimmer only managed 70.
82 is about right for 127 at the motor!

"How much Mulla do you have? Maybe sell it? And upgrade"
Not likely, an upgrade... ie an xr5 is how much 38k onroad, considering I'd get say 12~15k trade 15k spent on my ST would make a xr5 killa!(RS conversion and then some).
If I was to get a new car(on the cards)it will probably be a Territory 2wd in white dumped to the weeds... just got married 3 weeks ago so something bigger might be needed soon.

Teki04 · 08-11-2006, 07:19 PM

How much Mulla do you have? Maybe sell it? And upgrade :P

BlueST170 (Marc) has done some exhaust mods I believe, which helped!

Blue_ST170 · 08-11-2006, 07:40 PM

yeh i did custom extractors and cat from Hi-Tech which did a bit and also found a k&n panel filter will do just as much as a pod cause the St's got a pretty good intake already.....although cai is the best.

Im looking at getting a bluefin next....

Teki04 · 08-11-2006, 10:48 PM

Surely a Territory would be more then 38k on the road? :P

Go the XR5T

XP6 · 09-11-2006, 01:46 AM

Quote:

Originally Posted by Teki04

Surely a Territory would be more then 38k on the road? :P

Go the XR5T

Yep start at 52K for the 2wd Ghia... bout 55 on road.(plus 5k for some phat 20's and a dumpin!)

Blue_ST170 · 09-11-2006, 01:14 AM

Yeh its pretty hard to get much outta the ST without some serious mods.....the exhuast and intake r pretty well sorted.......

i like having the custom cat etc and the stock back cause u get a nice sound without it being loud.....but would def recommend at least a high flow cat cause the ford ones die anyway and they r like 5 grand for a new one cause its a custom job for the ST170 and has to be shipped form england.

Other than that ide do a k&n panel, underdrive pulleys and a ecu flash........Unless u go turbo....

QLDxr · 09-11-2006, 02:38 PM

I've only spent 30 quid on my ST. Bought a K&N Panel filter when in the UK last week and also got a 'couple of unique' cal files from a mate at Ford R&D UK. I used to work there so got hold of a unique cal. that was never released.
I.e. this cal file will eliinate the cold start and drive poor performance, which is in the standard cal to get 'cat temp up' for emissions. The cal also has more spark and fuel across the table.
Will let you know how she drives....

Cheers,

Mike