New WADECAM 1636 Experiences

[Grechie]

Hey guys...after deciding what cam to upgrade to from a stock cam, id defently recommend the 1636, apprently theres only 2 other people with this profile keith russel sed, wen i went to wade on monday, a guy from south australia and a guy from sydney?.....b4 i continue any further just wanna thank neb for installin this cam in on monday night...we had a troubles, all because wen i poured oil on the cam, it got the plugs wet...DOH

anyways, after goin with nebs bro alex for a 2 hour run in to willy and on the high way , and just random places @ 1/4 throttle, it started to feel alot more responsive on the throttle, it loved to hold gears with power button off, and after running it in (no high rpm) after 2 hours i slowly started giving it off the line to 60km then let go, after roughly 4 hours, i went to niko's joint were he gave me his EBXR map sensor to try , this is wen i gave it sh!t...i took it down the road of BP , (that leads to you yangs) and booted it @ 50 clicks in 1st, it PULLED all the way to 5600rpm and didnt stop, i swear, i was stumped, i usually wait till i feel the car stop pulling but it didnt and it went straight into redline and close to 6000rpm nearly...which i put in 2nd, now no joke b4 i new wat was goin on i look @ the speedo, it was @ 130km in 2nd gear..., 3rd come along and it shot to 160 very quickly were i backed off...now this whole time the car DIDNT stop a torque curve!

this profile rocks, i was told it pulls from 1,100rpm to redline..now i will need a new dif.. i have a 2.77 Single spinner...so i dont have the 0-30km pulling i need :(

the mods i have with this cam are a K&N pod, pacey's, high flow cat, redback 2.5 inch exhaust n thats it...

ill get this cam dialed in asap but atm stock timing and i havent even resetted my ecu yet...

i defently recommend this Camshaft

-Grechie!