Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > OzECruisers (E/N/D Series) > OzECruisers General Discussions

OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS

Reply
 
Thread Tools Display Modes
Old 08-08-2005, 03:46 PM   #1
B.J(inCanb)
Regular Member
 
B.J(inCanb)'s Avatar
 
Join Date: Jul 2005
Location: Canberra
Posts: 66
Default EB11 Wagon, indicator problem..

Well after passing its RWC last week with flying colours our wagon has developed a funny problem. When selecting either indicator all the indicators work, left or right doesn't matter both sides go. Hubby will look at it tonight but I wondered if anybody else has had this problem, so solving some diagnostic time.

__________________
Cheers B.J
BA GT-P 288, Phantom with stripes.Leather and Premium Sound
B.J(inCanb) is offline   Reply With Quote Multi-Quote with this Post
Old 08-08-2005, 03:51 PM   #2
InitialD
Low and Loud
 
InitialD's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 3,273
Default

Flasher cam probly has died. have a look in the fuse compartment and try another Flasher cam (mostlikely blue or black large squareish unit with 4 or 5 pins on it)
__________________
1993 Ford Fairlane NC3 Silver - LTD mockup, Worked V8 & Auto, Fully Optioned, Half of my Audio department at work installed in the car

1993 Ford Falcon XR6 Poly Green Stationwagon - 4.0 I6, Auto, 3:45LSD, All the usual XR6 Stuff but in a wagon :
InitialD is offline   Reply With Quote Multi-Quote with this Post
Old 08-08-2005, 08:02 PM   #3
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

This problem is common when a car alarm is installed with diodes to the blinkers.Some times the diodes blow up and short to both blinkers.To fix it ..get under dash and snip diode connections then tape it up.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 08-08-2005, 10:25 PM   #4
tango07
Regular Member
 
Join Date: Mar 2005
Posts: 154
Default

This happened to one of the girls wagons I done the tests .and found out it was a broken stalk. got one from the wrecker as it was too expensive to buy a new one. John.
tango07 is offline   Reply With Quote Multi-Quote with this Post
Old 31-08-2005, 04:50 PM   #5
B.J(inCanb)
Regular Member
 
B.J(inCanb)'s Avatar
 
Join Date: Jul 2005
Location: Canberra
Posts: 66
Default Solution

Sorry to bump this up just thought I would let you know what the problem was. Turns out that the top of the exhaust pipe had a large hole, the heat from this had melted and fused togther the wires for the trailer plug and the fuel tank sensor. Problem fixed with new exhaust system and new wiring installed for trailer and sensor. Bonus is car is running far better as well.
__________________
Cheers B.J
BA GT-P 288, Phantom with stripes.Leather and Premium Sound
B.J(inCanb) is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 08:20 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL