|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-04-2011, 09:10 AM
|
#1 | ||
|
Starter Motor
Join Date: Mar 2011
Location: Wollongong
Posts: 5
|
Morning all,
Today I was replacing front pads in my series 3 xr8 and found that the pads that I had (DB1353) as listed for au3 tickford didnt fit the calipers.Further inspection on the removed pads I found part no DB1375.Cross referencing this no. on the Bendix web site I found out that these pads fit au2/3 utes.Having just bought this vehicle and not being sure of its history I can only assume that theses calipers have been changed at one point OR where fitted as an upgrade(or downgrade) at time of purchase.Is there any kind people out there that maybe able to shed some light. |
||
|
|
|
10-04-2011, 10:29 AM
|
#2 | ||
|
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
What size diameter are your rotors? There were 2 brake packs available - standard is 287mm rotor and upgrade is 322mm. From memory the DB1353 is to suit the 322mm upgrade.
__________________
2024 F150 XLT
|
||
|
|
|
|
10-04-2011, 10:46 AM
|
#3 | ||
|
Starter Motor
Join Date: Mar 2011
Location: Wollongong
Posts: 5
|
Right o, Have replaced these with slotted rotors but diameter is standard 287mm.Calipers are PBR.
Many thanks for your reply. |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
AU111 XR8 Brakes
Linear Mode
