AU6 Flash Tune by G&D - every KW counts

[G&D PERFORMANCE]

Originally Posted by stiddy

Can you "flycut" into the stock pistons??
I have a manual and I love a lumpy idle - and my car barely see's below 2500rpm so really the bigger the cam the better.. lol :P

Another reason I want the compression kept the same is because im looking at bolting on a Vortech S trim blower later on down the track.. one of the main reasons I want a 'full' rebuild..

Will be almost time for another phone call I think.. Will have a budget to work with by April..

Depending on the stock pistons strength you can carefully flycut them a little.A built engine should have A/market pistons anyway.
I'd like to see a camshaft from Hell in it with the manual combo & make some real power.Only problem is that big cams & low compression = low cylinder pressure & a lack of engine efficiency especially at low engine speeds,you really need a combination using more compression with a larger cam.

[stiddy]

ok yep I follow..
a cam from hell sounds liek fun.. maybe i should just focus on one for now, the s/c is still a way off, was just thinking lower comp to make it easier in the future, but if its gonna make it a pig n/a, will just have it built properly n/a and re - address the compression issue when its time to go the forced induction route, its still a way off yet, but its on the books.. the rebuild will and I want it to happen in April/May..

[Kev_BLNXR8_Ute]

Originally Posted by stiddy

ok yep I follow..
a cam from hell sounds liek fun.. maybe i should just focus on one for now, the s/c is still a way off, was just thinking lower comp to make it easier in the future, but if its gonna make it a pig n/a, will just have it built properly n/a and re - address the compression issue when its time to go the forced induction route, its still a way off yet, but its on the books.. the rebuild will and I want it to happen in April/May..

I tell you what Stiddy, You wont be sorry if you let the G&D boys build your engine. They know their stuff.

It all comes done to how much money you have to spend.

Top quality parts will always cost money.....
As most people know there are always ways to cut corner's and save a buck. Been there done that.
And in the end I would have been better off spending the extra at the time...

Cheers...Kev

[Mark351]

I've got an manual, and now that we have another car in the family that car do highway miles, I'm up for a cam from hell!

[Kev_BLNXR8_Ute]

Originally Posted by DeathXR

I've got an manual, and now that we have another car in the family that car do highway miles, I'm up for a cam from hell!

Bring it on...

Dont forget to let me know when. Im just around the corner and brew a mean coffee...Or pour a drink of choice.

Kev

[stiddy]

Originally Posted by Kev_xr8_ute

I tell you what Stiddy, You wont be sorry if you let the G&D boys build your engine. They know their stuff.

It all comes done to how much money you have to spend.

Top quality parts will always cost money.....
As most people know there are always ways to cut corner's and save a buck. Been there done that.
And in the end I would have been better off spending the extra at the time...

Cheers...Kev

Thanks for that Kev, have spoken with Glenn from GnD over the past 3 days now..
just working out prices and whats actually can be done to the motor to around my budget...
Glenns got some big ideas.. more than I could of possibly thought about to be honest.. I think by the time hes finished it he wont let me have it back hahaha..

thanks...
Matt

[stiddy]

Originally Posted by DeathXR

I've got an manual, and now that we have another car in the family that car do highway miles, I'm up for a cam from hell!

random says: whats been done to your car buddy?
DeathXR says: GnD cam from hell!
random says: so they do exist!?!?! *faints from disbelief*


makes you feel all warm and fuzzy inside dosent it? LOL

[Kev_BLNXR8_Ute]

Originally Posted by stiddy

Thanks for that Kev, have spoken with Glenn from GnD over the past 3 days now..
just working out prices and whats actually can be done to the motor to around my budget...
Glenns got some big ideas.. more than I could of possibly thought about to be honest.. I think by the time hes finished it he wont let me have it back hahaha..

thanks...
Matt

They all have some serious issues down at G&D. :Up_to_som They are basicly one sick bunch of people when it comes to performance cars. :eclipsee_ If you have money and you want power LOOK OUT....

The thing you dont get to see is the GRIN Glenn gets on his face when you start talking more power.The more he tells you about what he can do the bigger the GRIN gets.
I can just imagine the grin now and how excited he would be talking to you about going sick on a I6.

They love there cars thats for sure.... :SaiyanSmi


Cheers .......... KEV

[Casper]

Originally Posted by Kev_xr8_ute

They all have some serious issues down at G&D. :Up_to_som They are basicly one sick bunch of people when it comes to performance cars. :eclipsee_ If you have money and you want power LOOK OUT....

The thing you dont get to see is the GRIN Glenn gets on his face when you start talking more power.The more he tells you about what he can do the bigger the GRIN gets.
I can just imagine the grin now and how excited he would be talking to you about going sick on a I6.

They love there cars thats for sure.... :SaiyanSmi


Cheers .......... KEV

That would explain Glenn's expression at Heathcote.. Looked like someone had botox'ed his face into a mega Joker grin :

[SpoolMan]

Originally Posted by Casper

That would explain Glenn's expression at Heathcote.. Looked like someone had botox'ed his face into a mega Joker grin :

One thing about Glenn he always is smiling, never stops, even when he is p#ssed off he is still smilling....the smiling assassin on the race track _2:

[Whoosha]

Originally Posted by SpoolMan

One thing about Glenn he always is smiling, never stops, even when he is p#ssed off he is still smilling....the smiling assassin on the race track _2:

I reckon the day he fired that rotten TT ute of his up he fractured his lower jaw bone : : one "SICK PUPPY" for sure :Reverend: :Reverend:

[G&D PERFORMANCE]

Originally Posted by MickyB

Thanks for the reply, given that I will not be getting the car until the end of the financial year (fathers old company car) there may have been some more development work done on the VCT engine. If not, then given I am quite close to G&D geographically I will be happy for them to do some R&D when the time comes. I am hoping for around 150rwkw from an AU1 5 Speed XR6 VCT, so hopefully this is possible without a cam change (are there even change over cams?), or head work.

G&D VCT cams are ready to go.

[RspecAU]

Originally Posted by G&D PERFORMANCE

spot on Kev,the box is $595 plus $66 fitting.Of course we'll work Sat for the Ford brigade.

cheers

: Get one of those boxes ready Glenn i'll be in for in about 6 weeks

[G&D PERFORMANCE]

Originally Posted by RspecAU

: Get one of those boxes ready Glenn i'll be in for in about 6 weeks

Consider it done mate

[Kev_BLNXR8_Ute]

For anyone interested In getting a flash tune, G&D are running a special offer for the Month of March....More info under the sponsors section.

[stiddy]

Just out of curiosity, do GnD have Forumers rates, like 10% discount type stuff?

[G&D PERFORMANCE]

Originally Posted by stiddy

Just out of curiosity, do GnD have Forumers rates, like 10% discount type stuff?

Unfortunately with performance industry pricing being very competitive we can't afford to discount & pay the right staff & have the right equipment to deliver the best results.We can occasionally offer bonus's on a wide scale every so often to help out as for the month of march.

We can guarantee that we will deliver the best customer service,best performance & best race track support you'll get anywhere in the country.We never rest & continually R&D,we are dedicated to getting the best result for our customers.

Cheers
Glenn

[Casper]

I've seen some of the prices.. its cheaper than many of the more commonly known places anyhow.. at least for us I6 owners. Considerably cheaper in most cases.

[Whoosha]

Originally Posted by Casper

I've seen some of the prices.. its cheaper than many of the more commonly known places anyhow.. at least for us I6 owners. Considerably cheaper in most cases.

: And for that special customer a spot on my truck when the crazys :nutsycuck from cranny come out to play............. :thebirds:
LOL Whoosha.........

[Casper]

Originally Posted by Whoosha

: And for that special customer a spot on my truck when the crazys :nutsycuck from cranny come out to play............. :thebirds:
LOL Whoosha.........

LOL, I dont want or need to be a special customer.. just one treated with a bit of respect.. something Glenn has already done.

I'll take the spot on the truck though :

[ratter]

For anyone questioning prices, you normally only get what you pay for and quality cost more than rubbish.

[stiddy]

Originally Posted by G&D PERFORMANCE

Unfortunately with performance industry pricing being very competitive we can't afford to discount & pay the right staff & have the right equipment to deliver the best results.We can occasionally offer bonus's on a wide scale every so often to help out as for the month of march.

We can guarantee that we will deliver the best customer service,best performance & best race track support you'll get anywhere in the country.We never rest & continually R&D,we are dedicated to getting the best result for our customers.

Cheers
Glenn

Ok cool, was just curious.. after reading that, your doing alot more than what that 10% is worth lol..

oh and whoosha, just remember to leave another spot for me ;)

thanks

Matt

[Kev_BLNXR8_Ute]

Just my 2 cents.... I recon G&D are extreamly well priced to start with and the do care about the customer...It doesnt matter if your Male or Female they will treat you with respect...



Whoosha, You Better make sure you get the BIG truck from now on.......
Ohh yeah and looks like we might have a full truck of FORDS for a change.
Im sick of my ute been stuck on the truck with all those 10 -11 sec Holdens...

[Tornado]

Hi Guys,

Have you done any flash tuning work on a T3 ?
What sort of gains should I expect from a flash tune on my stock T3 auto ?
What should I expect from an exhaust and flash ?

Below is the dyno printout from my car.

[G&D PERFORMANCE]

Originally Posted by Tornado

Hi Guys,

Have you done any flash tuning work on a T3 ?
What sort of gains should I expect from a flash tune on my stock T3 auto ?
What should I expect from an exhaust and flash ?

Below is the dyno printout from my car.

Haven't done a T3 yet but I would expect to see good gains with intake,exhaust & edit.Would like to see 220rwkw's plus from your combo

[stiddy]

G&D PERFORMANCE has exceeded their stored private messages quota and can not accept further messages until they clear some space.

Glenn!!! lol cant get any messages across to you.

[FRDGAL]

Originally Posted by Kev_xr8_ute

It doesnt matter if your Male or Female they will treat you with respect...

Agreed!!

[G&D PERFORMANCE]

Originally Posted by stiddy

G&D PERFORMANCE has exceeded their stored private messages quota and can not accept further messages until they clear some space.

Glenn!!! lol cant get any messages across to you.

Fixed mate

[MickyB]

Originally Posted by G&D PERFORMANCE

G&D VCT cams are ready to go.

That sounds awesome, what would I be looking at price wise for the cam, and edit installed? Also what kinda numbers would you expect it to pull at the rears combined with pacemaker comps, 2.5 inch exhaust, and tickford intake (5 speed manual AU1 VCT)?

[Casper]

Originally Posted by stiddy

random says: whats been done to your car buddy?
DeathXR says: GnD cam from hell!
random says: so they do exist!?!?! *faints from disbelief*


makes you feel all warm and fuzzy inside dosent it? LOL

Originally Posted by G&D PERFORMANCE

G&D VCT cams are ready to go.

random says: whats been done to your car buddy?
Casper says: GnD VCT billet monster cam from hell!
random says: oh dear god noooooooooo *dies from fear*