|
04-09-2007, 10:52 PM | #1 | ||
FG xr6 Ute.
Join Date: Jul 2006
Location: South Coast
Posts: 232
|
Does anyone know what is involved in replacing the left side dash vents in a AUII XR8, i called my local Ford Service center and they told me its a $90 job if i supply the vent, i got hold of a second hand vent off ebay its as good as new and by looking at it there is 2 screws under the airbag pad on the dash.
i just want to double check that these guys at ford are telling me the right thing when they say the whole airbag has to be removed to replace the vents. once i said i wanted to book the car in for a service but i thought 90 bucks was a bit rich to replace the vent he said "just bring the part along when you get the car serviced and they will whack it in a bit quicker for you". can someone let me know plz. cheers. |
||
05-09-2007, 09:27 AM | #2 | |||
You can't stop the signal
Join Date: Nov 2005
Location: Behind a computer at work
Posts: 1,624
|
Yup your right. There are two screws behind the airbag. However, the airbag is held in by 4 break once clips(which do break when you take it out) and they will need to be replaced as well.
All you need to do is disconect the battery for 5 min (cause your playing with airbags), then wrap a screw driver in a cloth, and shove it inbetween the bottom of the airbag and the dash at each coner and pry upwards. Once all the clips are broken, withdraw the airbag from the dash and disconnect the wiring connectors. I reckon this would take no more than half an hour. Another thing is, that in my car (no passenger airbag) i've done this and the panel will just sit where it's ment to without the clips, so i'm not going to replace them. But if you've got an airbag it would be a good idea Cheers
__________________
Quote:
|
|||
05-09-2007, 11:49 AM | #3 | ||
FG xr6 Ute.
Join Date: Jul 2006
Location: South Coast
Posts: 232
|
thanks for your reply mate,
what your telling me is pretty much what the guy told me that i got the vent off he said it wasnt a hard job, but when talking to ford they made it out to be a 3 days adventure lol. do you think 90 bucks is alright as there is clips that need replacing? i am hoping when he said bring the vent with you and we will whack it in quicker for you meant he will not be charging me 90 bucks, i am a bit scared to try this myself as easy as it sounds, if i let the bags off or break something im sure my missus will break my neck |
||
05-09-2007, 01:06 PM | #4 | ||
Oh Yeah!
Join Date: Jan 2005
Location: Manhattan, NY
Posts: 1,023
|
The four plastic clips once broken are about $2.50 each roughly
__________________
Oh no! Duffman can't breath! Oh, yeah! |
||
05-09-2007, 07:27 PM | #5 | ||
Karasu
Join Date: May 2005
Location: Melbourne Vic
Posts: 208
|
You don't need to remove the airbag to remove the vent, yes the screws are under the cover and yes you will have to replace the clips that hold the cover in place but if you leave the ignition off you can pry the cover off, replace the vent and replace the clips without disturbing the airbag at all, I have done this several times
|
||
05-09-2007, 08:23 PM | #6 | ||
FG xr6 Ute.
Join Date: Jul 2006
Location: South Coast
Posts: 232
|
ok nice,
so nothing will set the air bag off if i was to attempt this? i can pick up the clips from ford parts shop yeah? |
||
05-09-2007, 08:35 PM | #7 | ||
FF.Com.Au Hardcore
Join Date: Sep 2005
Location: Belmont, WA
Posts: 1,301
|
Leave the positive lead off the battery for 5 mins before you do it.
Nothing is likely to set it off, but better safe than sorry. |
||
05-09-2007, 08:43 PM | #8 | ||
FG xr6 Ute.
Join Date: Jul 2006
Location: South Coast
Posts: 232
|
ok no worries, thanks for your help guys ;)
|
||
05-09-2007, 11:37 PM | #9 | ||
orgasmic.
Join Date: Dec 2004
Location: 3280
Posts: 189
|
Description: Clip Air Bag
Part No : AU F04B26 A QTY : 4 List price $2.73ea
__________________
1999 AUI Fairmont Dynamic White, King Superlows, Tickford Intake, Pioneer DEH-P6850MP HU, Clarion SRC5715 5x7s (rears), Clarion APA2001 Amplifier running a Pioneer 12" Sub. 121.0rwkw |
||
10-09-2007, 06:52 PM | #10 | ||
FG xr6 Ute.
Join Date: Jul 2006
Location: South Coast
Posts: 232
|
Thanks for that info guys,
i called the service center and told him i had the part number for the clips and had found out how to do the job he said to me he would look after me as i was getting the service with them and all and sais he would do it for $20 so i agreed for them to do it i could just imagine the amount of people that would have just paid the 90 bucks and let them do it. thank god for FF.com.au ;) |
||
Thread Tools | |
Display Modes | |
|