wiring loom on ea

[Jason[98.EL]]

gday all

just wondering if anyone can tell me if the wiring loom for the computer is the same on mpfi and the throttle body type

im about to convert to mpfi

i have the wiring loom this and computer but im hoping that the looms are the same

can onyone help me on this

[spope]

In a word, yes. From the computer to the engine bay, they are the same, except there is one wire that is different, and that is for the ISC motor.
Your current cfi setup has a four pin plug that connects to the isc motor - you need to take the grey/white wire from that plug and connect it to the grey/white wire on your new manifold loom. Other than that, it plugs straight in.
You don't need to change the loom going the computer if you do this little fix

[Jason[98.EL]]

Originally Posted by spope

In a word, yes. From the computer to the engine bay, they are the same, except there is one wire that is different, and that is for the ISC motor.
Your current cfi setup has a four pin plug that connects to the isc motor - you need to take the grey/white wire from that plug and connect it to the grey/white wire on your new manifold loom. Other than that, it plugs straight in.
You don't need to change the loom going the computer if you do this little fix

thanx mate

thats all the info i think i need

[DOMN8N]

i had e efi ea and i put a 4.0 in but i had to change the entire loom of the car