Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 09-06-2015, 08:20 PM   #31
DoreSlamR
Fiat POWAAH!
 
DoreSlamR's Avatar
 
Join Date: Nov 2005
Location: Western Australia
Posts: 2,309
Default Re: Something to consider before hooking up 3500 kg

Quote:
Originally Posted by zilo View Post
Dunno what you mean....
it's a 90mm towball and towbar as supplied by Hayman Reese.

You saying it's a problem? (I'm all ears)
A stock cruiser won't tow a bobcat, not legally. So you've obvioulsy upgraded it somewhat if you're using a 90mm towball

I had a 5 tonne Isuzu tipper with which I towed my bobcat on a 4.5 tonne plant trailer, the trailer weighed 800kg, which left me 3.7 tonne, with bucket, forks, full tank of fuel and I was pretty close to that..

I just wouldn't dream of towing a bobcat on much less than that..
__________________
Holden: If you cant beat them, buy them.
DoreSlamR is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 09-06-2015, 08:46 PM   #32
Brazen
FF.Com.Au Hardcore
 
Brazen's Avatar
 
Join Date: Nov 2009
Posts: 3,876
Default Re: Something to consider before hooking up 3500 kg

Pfft just one bobcat? :-)








Last edited by Brazen; 09-06-2015 at 08:53 PM.
Brazen is offline   Reply With Quote Multi-Quote with this Post
5 users like this post:
Old 09-06-2015, 08:52 PM   #33
DoreSlamR
Fiat POWAAH!
 
DoreSlamR's Avatar
 
Join Date: Nov 2005
Location: Western Australia
Posts: 2,309
Default Re: Something to consider before hooking up 3500 kg

Well that makes my load look rather pathetic lol

__________________
Holden: If you cant beat them, buy them.
DoreSlamR is offline   Reply With Quote Multi-Quote with this Post
Old 09-06-2015, 08:53 PM   #34
Matty4
Banana
 
Matty4's Avatar
 
Join Date: Sep 2005
Location: Wandin North, VIC
Posts: 2,031
Default Re: Something to consider before hooking up 3500 kg

Quote:
Originally Posted by zilo View Post
Just another jealous troll.
Pfftt................you obviously know me so well
__________________
2024 Ford Ranger Wildtrak V6 w/PP
2012 WK2 Jeep Grand Cherokee Overland CRD
Matty4 is offline   Reply With Quote Multi-Quote with this Post
Old 09-06-2015, 08:58 PM   #35
Brazen
FF.Com.Au Hardcore
 
Brazen's Avatar
 
Join Date: Nov 2009
Posts: 3,876
Default Re: Something to consider before hooking up 3500 kg

Quote:
Originally Posted by DoreSlamR View Post
Well that makes my load look rather pathetic lol
Don't feel too bad those pickups are absolute beats.

The Dodge Ram 6.7 diesel has 1,127 NM of torque and a 13.6 tonne tow rating. Just insane.
Brazen is offline   Reply With Quote Multi-Quote with this Post
Old 09-06-2015, 09:28 PM   #36
BadMax
FF.Com.Au Hardcore
 
Join Date: Sep 2009
Posts: 1,316
Default Re: Something to consider before hooking up 3500 kg

Long term durability is also questionable, not only the fact the someone with zero experience in towing can haul around 3,500Kg!

I took these pics wen a T30 Xtrail came into my shop, the owner noticed when un-hitching a 6x4 the towbar moved. I climbed underneath to find both chassis rail extensions had torn its spot weld from the floor, main chassis rails and beaver panel.
The vehicle had not been overloaded but was used for regular towing of a 16 foot caravan, I assume around 1000kg? We assume the 'load levelers' contributed to the failure as it places further strain on the towbar to level the vehicle out. I have serious concerns over these alleged load increasing devices, I assure you that if something fails your factory warranty is out the door and you're probably left standing on your own probably insurance wise also...read the fine print.

This older gentleman was genuinely distressed about it, he repeatedly said "imagine if it let go with the caravan on the back at 110kmh". And he's right, the whole towbar would have dislodged and safety chains would have done nothing to stop the van!





__________________
2015 FG-X XR6 Turbo Ute
Silhouette.
ZF.
Single hump hard lid.
XR8 Bonnet
Colour coded mirrors.
Tint.
Reverse camera.
K&N.
More down the track...
BadMax is offline   Reply With Quote Multi-Quote with this Post
8 users like this post:
Old 09-06-2015, 09:36 PM   #37
mechanic
FF.Com.Au Hardcore
 
Join Date: Aug 2013
Location: Cairns FNQ
Posts: 602
Default Re: Something to consider before hooking up 3500 kg

Re BadMax pictures. Nothing like a few spot welds to hold things together.
The scary part is that there's dozens of those types of rigs getting around our roads.
mechanic is offline   Reply With Quote Multi-Quote with this Post
Old 09-06-2015, 09:45 PM   #38
BadMax
FF.Com.Au Hardcore
 
Join Date: Sep 2009
Posts: 1,316
Default Re: Something to consider before hooking up 3500 kg

Yeah, that's all that holds most cars together. I've never seen anything like it before.
Truly horrifying, plus all those people who tow their caravan to their favourite spot once a year and never check it over.
__________________
2015 FG-X XR6 Turbo Ute
Silhouette.
ZF.
Single hump hard lid.
XR8 Bonnet
Colour coded mirrors.
Tint.
Reverse camera.
K&N.
More down the track...
BadMax is offline   Reply With Quote Multi-Quote with this Post
Old 09-06-2015, 09:56 PM   #39
zilo
BANNED
 
zilo's Avatar
 
Join Date: Jul 2012
Posts: 2,886
Default Re: Something to consider before hooking up 3500 kg

Quote:
Originally Posted by DoreSlamR View Post
A stock cruiser won't tow a bobcat, not legally. So you've obviously upgraded it somewhat if you're using a 90mm towball

..
Good to see someone in here can read before dribbling nonsense all over a keyboard.
zilo is offline   Reply With Quote Multi-Quote with this Post
Old 09-06-2015, 09:58 PM   #40
zilo
BANNED
 
zilo's Avatar
 
Join Date: Jul 2012
Posts: 2,886
Default Re: Something to consider before hooking up 3500 kg

Quote:
Originally Posted by Matty4 View Post
Pfftt................you obviously know me so well

You bought a Jeep, that tells me a lot.
zilo is offline   Reply With Quote Multi-Quote with this Post
Old 09-06-2015, 11:19 PM   #41
Matty4
Banana
 
Matty4's Avatar
 
Join Date: Sep 2005
Location: Wandin North, VIC
Posts: 2,031
Default Re: Something to consider before hooking up 3500 kg

And you bought how many 380's?
Whats your point?

BTW, I usually like what you post and the things you've done but to start the insults because you decided to leave out some pertinent and relevent information............tells me a lot too.
__________________
2024 Ford Ranger Wildtrak V6 w/PP
2012 WK2 Jeep Grand Cherokee Overland CRD
Matty4 is offline   Reply With Quote Multi-Quote with this Post
Old 09-06-2015, 11:42 PM   #42
zilo
BANNED
 
zilo's Avatar
 
Join Date: Jul 2012
Posts: 2,886
Default Re: Something to consider before hooking up 3500 kg

Quote:
Originally Posted by Matty4 View Post

BTW, I usually like what you post and the things you've done but to start the insults because you decided to leave out some pertinent and relevent information............tells me a lot too.


I didn't leave anything out, post #25 says it all.

You insulted me in post #29 without reading the whole thread, pretty lame really if you can't read 4 posts up before posting.
zilo is offline   Reply With Quote Multi-Quote with this Post
Old 10-06-2015, 10:00 AM   #43
poppa smurf
FF.Com.Au Hardcore
 
poppa smurf's Avatar
 
Join Date: Jan 2012
Location: outback S.A...hiding in a workshop
Posts: 3,513
Default Re: Something to consider before hooking up 3500 kg

Quote:
Originally Posted by mechanic View Post
Re BadMax pictures. Nothing like a few spot welds to hold things together.
The scary part is that there's dozens of those types of rigs getting around our roads.
well, to me, yet another reason to have yearly inspections before roadworthy is given for registration purposes.

also a good, well trusted, mechanic is a must, pretrip checks are high on my agenda, mine has just been performed (heading for the snow).

I've seen a few a frames bent up on vans, load distribution hitches were blamed but were found not to be at fault, the a frames on the van were simply not fit for service, as are the above drawbar connections.

assuming the van is around the 1000 kilo mark (as stated by badmax) then that would give a ball weight of roughly 100 kilo's, not necessary to have the load levellers up to full strength and therefore would not have been able to have caused the damage.

the connections on the vehicle were simply not to standard.

"edit"
just quickly did a little bit of research on the X trail and its capacity, "load distribution hitches are not recommended as they may damage the vehicle"!
__________________
---------------------------------------------------------------

G'day....I'm Dave, ...everyone calls me Poppa,..05.. B.A. Fairmont mark II...

may your day's be filled with smiles, your life be filled with love, may your children know nothing but happiness and joy, cherish the memory of those who strove before us for they cleared the way, spare a thought for those who serve we owe so much to so many, life and the freedom to enjoy it is a special gift that can be taken away far too soon!

Last edited by poppa smurf; 10-06-2015 at 10:17 AM.
poppa smurf is offline   Reply With Quote Multi-Quote with this Post
Old 10-06-2015, 12:18 PM   #44
Matty4
Banana
 
Matty4's Avatar
 
Join Date: Sep 2005
Location: Wandin North, VIC
Posts: 2,031
Default Re: Something to consider before hooking up 3500 kg

I can read, very well.
Fitting a 90mm towball to an aftermarket towbar doesn't automatically increase the maximum towing capacity of the vehicle it's fitted to.
Just like a GVM increase doesn't increase its towing capacity.

Likewise, $5000 brakes on a trailer doesn't increase the maximum towing capacity of the vehicle either.

Post up your new compliance plate and engineering certificate showing the upgraded towing capacity of the Toyota to 3700kg or greater and I'll publicly apologise to you for hurting your feelings.
__________________
2024 Ford Ranger Wildtrak V6 w/PP
2012 WK2 Jeep Grand Cherokee Overland CRD
Matty4 is offline   Reply With Quote Multi-Quote with this Post
4 users like this post:
Old 10-06-2015, 12:27 PM   #45
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,604
Default Re: Something to consider before hooking up 3500 kg

Customer of mine is upgrading from PX Ranger to RAM 2500, has a 30ft 5th wheeler van he tows, it comes under 300kg or so under the max allowance, not only that but it didn't pull it very well.

They may be rated to 3500kg, but at the end of the day how well is something with only 470NM going to pull something with the aerodynamics of an appartment complex?

In this case the RAM 2500 replacing the Ranger is 280KW/1100nm torque.

He owns an earth moving company, so some of the attachments they put in the back for their equipment weigh heaps and it can also be used for this.

Its a 2014 model I think, 28,000km on the clock he got it for $120,000.

There are people buying these vehicles, a few of my customers have F250s as well, the ones which were sold here locally and another has a 2008 model.

Mind you we're out regional so size wise they aren't really an issue.

People complain about their price, at the end of the day look at how many people here on AFF have cars which they've sunk in close to or into the 6 figure range including purchase price.

Last edited by Franco Cozzo; 10-06-2015 at 12:37 PM.
Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Old 10-06-2015, 09:52 PM   #46
GREGL
FF.Com.Au Hardcore
 
Join Date: Aug 2008
Posts: 548
Default Re: Something to consider before hooking up 3500 kg

This information should be handed out with your paperwork when purchasing a vehicle . Not the comparison part, just what you are LEGALLY allowed to carry/tow . At present I have a v6 bravo rated at 1800 kg, now not a lot has changed in chassis or power outputs between 2006 and now . The tare weight is about the same, the load that is ball park and mechanically I would envisage the clutch to be as strong so what gives ?
Admittedly a new fangled diesel has better low down torque but that's for going forward not controlling what is behind .
As far as licencing goes a refresher course in courtesy would be a big start . I imagine few people would know how to pull a swaying caravan straight under an emergency situation at 90 kmh either . I know one very competent driver who towing his bushtracker with a 100 series l/cruiser who rolled the lot when passed by a oncoming r/train and he has been driving (and towing) all variations of them for years .
GREGL is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2015, 02:49 PM   #47
mechanic
FF.Com.Au Hardcore
 
Join Date: Aug 2013
Location: Cairns FNQ
Posts: 602
Default Re: Something to consider before hooking up 3500 kg

At post 36 BadMax photos.
Towbars we used to fit came with a length of flat bar approx. 100 x 6 mm about 400 mm long which had 2 pre drilled holes to match 2 holes in the towbar mounting which went under the chassis rail.
Fitting them involved removal of everything from the boot and drilling through the boot floor and using the plates provided as support for the 2 bolts to go through the chassis rail and the tow bar.
Boot mats never quite went down flat again as the heads of the 2 bolts on each side were noticeable through the rubber mat or carpet, never saw a towbar fall off though.
On a recent extended trip through Tasmania we saw dozens of X Trails towing vans and camper trailers, makes one wonder how often these problems are arising and what the end result will be. Caravan careering down the highway with a towbar attached and no vehicle ????
mechanic is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2015, 04:07 PM   #48
SumoDog68
FF.Com.Au Hardcore
 
Join Date: Nov 2006
Posts: 1,128
Default Re: Something to consider before hooking up 3500 kg

Quote:
Originally Posted by GREGL View Post
This information should be handed out with your paperwork when purchasing a vehicle . Not the comparison part, just what you are LEGALLY allowed to carry/tow . At present I have a v6 bravo rated at 1800 kg, now not a lot has changed in chassis or power outputs between 2006 and now . The tare weight is about the same, the load that is ball park and mechanically I would envisage the clutch to be as strong so what gives ?
Admittedly a new fangled diesel has better low down torque but that's for going forward not controlling what is behind .
As far as licencing goes a refresher course in courtesy would be a big start . I imagine few people would know how to pull a swaying caravan straight under an emergency situation at 90 kmh either . I know one very competent driver who towing his bushtracker with a 100 series l/cruiser who rolled the lot when passed by a oncoming r/train and he has been driving (and towing) all variations of them for years .
Ranger is a new ,stronger platform - bigger , more torque and much heavier . All in all it is much more stable and capable towing platform than previous generation ute. Now whether 3500kg towing capacity is a bit optimistic remains to be seen. Manufacturers use tow rating as a marketing tool and it is important to be the market leader.
3.5t seems to be the new standard for utilities .
SumoDog68 is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2015, 06:27 PM   #49
Yellow_Festiva
Where to next??
 
Yellow_Festiva's Avatar
 
Join Date: Oct 2006
Location: Sydney
Posts: 8,893
Default Re: Something to consider before hooking up 3500 kg

Quote:
Originally Posted by SumoDog68 View Post
Ranger is a new ,stronger platform - bigger , more torque and much heavier . All in all it is much more stable and capable towing platform than previous generation ute. Now whether 3500kg towing capacity is a bit optimistic remains to be seen. Manufacturers use tow rating as a marketing tool and it is important to be the market leader.
3.5t seems to be the new standard for utilities .
I would love to know how they get the tow figure to be honest.

There are many examples of totally different cars (weight / size / power / torque etc) having the exact same tow rating.

Or, cars that seem much up to the task, yet are not rated to tow at all.

I tow a ton behind my Mitsi and it feels like nothing is there. It's rated to tow 2. Yet there are vehicles that are not that much more powerful or heavy that go to 3.5t...

I would hate to have that behind me in a 'worst case scenario'...
__________________
___________________________

I've been around the world a couple of times or maybe more.......
Yellow_Festiva is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2015, 07:10 PM   #50
SumoDog68
FF.Com.Au Hardcore
 
Join Date: Nov 2006
Posts: 1,128
Default Re: Something to consider before hooking up 3500 kg

Quote:
Originally Posted by Yellow_Festiva View Post
I would love to know how they get the tow figure to be honest.

There are many examples of totally different cars (weight / size / power / torque etc) having the exact same tow rating.

Or, cars that seem much up to the task, yet are not rated to tow at all.

I tow a ton behind my Mitsi and it feels like nothing is there. It's rated to tow 2. Yet there are vehicles that are not that much more powerful or heavy that go to 3.5t...

I would hate to have that behind me in a 'worst case scenario'...
It is a numbers game - take Ranger for example 6000 kg GCM ,3500 kg tow rating which leaves 2500kg for the car and driver , passengers and all the gear on board. Consider how many people install bull bars , sliders ,canopies ,draws and carry stuff on roof racks , on board fridges etc. - empty Ranger is about 2200kg so that leaves 300kg for payload at max towing capacity.
so you can load the car to 2500 kg if you want to tow 3500kg but GVM is 3200kg at which you can tow 2800kg.
Realistically you want your tow vehicle to weigh more than the load - for regular 3.5t towing something like F250 would be much better choice .

Last edited by SumoDog68; 11-06-2015 at 07:16 PM.
SumoDog68 is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2015, 07:18 PM   #51
zilo
BANNED
 
zilo's Avatar
 
Join Date: Jul 2012
Posts: 2,886
Default Re: Something to consider before hooking up 3500 kg

Quote:
Originally Posted by Matty4 View Post
I can read, very well.
Fitting a 90mm towball to an aftermarket towbar doesn't automatically increase the maximum towing capacity of the vehicle it's fitted to.
Just like a GVM increase doesn't increase its towing capacity.

Likewise, $5000 brakes on a trailer doesn't increase the maximum towing capacity of the vehicle either.

Post up your new compliance plate and engineering certificate showing the upgraded towing capacity of the Toyota to 3700kg or greater and I'll publicly apologise to you for hurting your feelings.

Your opinion/approval is of no value to me.

Another one for the ignore list....
zilo is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2015, 07:39 PM   #52
BadMax
FF.Com.Au Hardcore
 
Join Date: Sep 2009
Posts: 1,316
Default Re: Something to consider before hooking up 3500 kg

@mechanic with the complexity of construction and materials used in vehicles today, doing what used to be done would probably write the vehicle off.
__________________
2015 FG-X XR6 Turbo Ute
Silhouette.
ZF.
Single hump hard lid.
XR8 Bonnet
Colour coded mirrors.
Tint.
Reverse camera.
K&N.
More down the track...
BadMax is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2015, 08:05 PM   #53
Yellow_Festiva
Where to next??
 
Yellow_Festiva's Avatar
 
Join Date: Oct 2006
Location: Sydney
Posts: 8,893
Default Re: Something to consider before hooking up 3500 kg

Quote:
Originally Posted by SumoDog68 View Post
It is a numbers game - take Ranger for example 6000 kg GCM ,3500 kg tow rating which leaves 2500kg for the car and driver , passengers and all the gear on board. Consider how many people install bull bars , sliders ,canopies ,draws and carry stuff on roof racks , on board fridges etc. - empty Ranger is about 2200kg so that leaves 300kg for payload at max towing capacity.
so you can load the car to 2500 kg if you want to tow 3500kg but GVM is 3200kg at which you can tow 2800kg.
Realistically you want your tow vehicle to weigh more than the load - for regular 3.5t towing something like F250 would be much better choice .
I can get my head around the maths involved and that isn't an issue. It's the actual figures associated with a certain model.

2009 Auto Suzuki Swift:
1.5L / 74kw / 133nm (petrol)
Kerb weight 1050kg
GCM 2470kg
Braked tow rating 1000kg.

2009 Auto Ford Focus:
2L / 100kw / 320nm (diesel)
Kerb weight 1458kg
GCM - not stated
Braked Tow rating 900kg.

The details for the manual are the same except it has a slightly lighter Kerb weight.

You then have the 2010 Focus XR5 manual:
2.5L / 166kw / 320nm
Kerb weight 1366kg
GCM - not stated
Braked tow rating 0kg (yes - nil).

2012 Ranger XL Hi-rider auto:
2.2L / 110kw / 375nm (diesel)
Kerb weight 1759kg
GCM - 5950
Braked tow rating 3350kg

2013 Hyundai Santa Fe auto:
2.2L / 145kw / 436nm (diesel)
Kerb weight - 1968kg
GCM - 4600kg
Braked tow rating - 2000kg.

Looking at those figures leaves me quite confused!

Imagine putting a ton behind a Swift? Yet when I put a ton behind my diesel Focus it didn't even raise a sweat....
Have I read correctly that in Europe the diesel Focus has a much higher tow rating? Why?

It's fine to put near double the weight behind the Ranger, yet the heavier and much more powerful Santa Fe is only good for 2000kg.

I assume there are many other factors like transmission / wheels / body strength / suspension etc that come into play but the comparison between the Swift and the Focus still has me scratching my head.....
__________________
___________________________

I've been around the world a couple of times or maybe more.......
Yellow_Festiva is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2015, 08:29 PM   #54
SumoDog68
FF.Com.Au Hardcore
 
Join Date: Nov 2006
Posts: 1,128
Default Re: Something to consider before hooking up 3500 kg

Each manufacturer works out their tow ratings depending (like you said ) on many variables.
Focus LV is power shift which is probably limiting factor in its towing capacity. Santa Fe is unibody and Ranger is full chassis. Manufacturers construct them , test them and rate them :-)
SumoDog68 is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2015, 08:56 PM   #55
simon varley
FF.Com.Au Hardcore
 
Join Date: Nov 2009
Posts: 2,880
Technical Contributor: For members who share their technical expertise. - Issue reason: Bringing sanity to the Everest threads. 
Default Re: Something to consider before hooking up 3500 kg

focus tow weight for Australia is limited by its ability to keep cool. Europe not (generally) so hot therefore can tow more weight.

XR5 deliberately not a tow car as it doesn't suit the marketing image.
simon varley is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2015, 09:27 PM   #56
mechanic
FF.Com.Au Hardcore
 
Join Date: Aug 2013
Location: Cairns FNQ
Posts: 602
Default Re: Something to consider before hooking up 3500 kg

Quote:
Originally Posted by BadMax View Post
@mechanic with the complexity of construction and materials used in vehicles today, doing what used to be done would probably write the vehicle off.
Yes I think that's correct. Saw some Air bag friendly 4wd bullbars that had a crumple section incorporated just before the mounting position on the chassis rail.
After extended sessions on corrugated roads the bullbars fell off as the crumple section cracked off completely.
Very disturbing those pics of the X Trail.
mechanic is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2015, 10:37 PM   #57
Matty4
Banana
 
Matty4's Avatar
 
Join Date: Sep 2005
Location: Wandin North, VIC
Posts: 2,031
Default Re: Something to consider before hooking up 3500 kg

Quote:
Originally Posted by zilo View Post
Your opinion/approval is of no value to me.

Another one for the ignore list....
That's OK, but I'm still waiting....
__________________
2024 Ford Ranger Wildtrak V6 w/PP
2012 WK2 Jeep Grand Cherokee Overland CRD
Matty4 is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2015, 10:46 PM   #58
pottery beige
FF.Com.Au Hardcore
 
Join Date: Jun 2009
Posts: 18,988
Default Re: Something to consider before hooking up 3500 kg

Quote:
Originally Posted by zilo View Post
Your opinion/approval is of no value to me.

Another one for the ignore list....
yoo are my fav

never block
pottery beige is online now   Reply With Quote Multi-Quote with this Post
Old 11-06-2015, 11:12 PM   #59
tex
Broken
 
tex's Avatar
 
Join Date: Dec 2005
Posts: 7,845
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: With the exception of maybe HSE2, nobody writes a review like Texy. 
Default Re: Something to consider before hooking up 3500 kg

[IMG][/IMG]

That's what I lug around behind my old effy.

It mightn't be flash, or fast, but its fit for purpose, never gets hot, always pulls up, keeps that boat straight and under control. Despite 650lt fuel under the boats floor and enough gear to start a tackle shop or open a fish shop on my way home.

The pics of that broken away tow hitch are frightening.

And like I said earlier, a popular and big selling 3500kg rated dual cab couldn't lug the same as my old manual F truck, which I might add, is still on the original clutch despite having towed and hauled its way to 250000+ km.

The gearing in modern soft 4x4 vehicles, in order to make them feel like a car on the hwy, and to use minimal fuel when unloaded, renders them not commercial. Despite what they are classified as by manufacturers and the public.

The old effy, she's got a crawler first gear, it will only do about 25kmh flat out lol. Unladen, 2nd gear starts are the norm....
__________________
The Scud GT

11.4 @ 128, 1.88 60ft.
tex is offline   Reply With Quote Multi-Quote with this Post
4 users like this post:
Old 12-06-2015, 04:49 AM   #60
blackf6
R51 Pathy, 91 Jayco Swan
 
blackf6's Avatar
 
Join Date: Dec 2010
Location: Mackay, QLD
Posts: 3,635
Default Re: Something to consider before hooking up 3500 kg

But f series are classed as light trucks. No dramas. Hilux, ranger, ect are just Utes.
blackf6 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 04:25 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL