|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
15-01-2007, 04:50 PM
|
#1 | ||
|
Size DOES matter!!!!
Join Date: Jan 2007
Location: Geelong
Posts: 18
|
Not sure If Ive put this in the right place, but I'm sure I will find out...
I'm building a 408 Clevo stroker to go into an XE ute, but going to run straight gas (Gas Research) as I plan for it to be a daily driver and dont want emission problems from the EPA again.The bottom end is almost complete and the next step is the heads. Does anyone know of the ideal head for Gas and this cube combo,AFD, CHI, Kostecki??? 2v, 3v, 4v...even factory cast...., or do you know of where I could get a comparison of head performance....Thanx |
||
|
|
|
15-01-2007, 04:59 PM
|
#2 | ||
|
XY Driv3r
Join Date: Jul 2005
Location: Melbourne
Posts: 3,004
|
http://www.fordforums.com.au/forumdisplay.php?f=9
check this side of the forums and Welcome! i wouldnt suggest starting a thread on which head is better neither...
__________________
|
||
|
|
|
|
15-01-2007, 05:00 PM
|
#3 | ||
|
under new management
Join Date: Dec 2006
Location: Perth
Posts: 1,325
|
Send me a message when you have bought your GRA throttle bodies as I have made some annular discharge venturis which will increase your CFM flow as the GRA flow figures are a long way below what they are quoting.
__________________
XW tarmac rally car, 3/4 race cam, NGK spark plugs |
||
|
|
|
|
15-01-2007, 05:05 PM
|
#4 | ||
|
Size DOES matter!!!!
Join Date: Jan 2007
Location: Geelong
Posts: 18
|
Will do..Already got them..
Last edited by MAD XE; 15-01-2007 at 05:16 PM. Reason: Wrong message |
||
|
|
|
|
15-01-2007, 05:19 PM
|
#5 | ||
|
under new management
Join Date: Dec 2006
Location: Perth
Posts: 1,325
|
What models have you bought S400 / S440? Those are the quoted flow figures but the 440 will only flow around around 298 to 308cfm at 1.5'. I have made up various different venturis that will lift the flow between 385 and 422 if your feeding a stroker.
__________________
XW tarmac rally car, 3/4 race cam, NGK spark plugs |
||
|
|
|
Alloy Heads, Which type is best???
Linear Mode
