Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 20-07-2011, 10:17 PM   #1
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,629
Default Automotive lighting

I'm curious if Halogen lights lose their luminosity/intensity as they age or have been on? My Phillips +80s don't seem to be as great as they used to be when I fitted them a few months ago. I've noticed they seem fairly average, not very intense to what I can remember when I first put them in.

I drive with my lights on when ever I drive, so about 2 hours 5 days a week.

Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2011, 05:51 AM   #2
Jim Goose
FF.Com.Au Hardcore
 
Join Date: Feb 2010
Location: Sun City, North Australis
Posts: 4,274
Default Re: Automotive lighting

If the wattage is greater then the factory ones you have installed then eventually you will start to kill wiring quicker... more resistance in the wires means a duller light, less current.
Or if not the case, if they are duller then when installed you have a wiring issue.
Bad earthing most likely.
Pull the plug off the end of the light and put a mulitmeter on it and see how many volts are there.
__________________
You've seen it, you've heard it and your still asking questions??

Don't write off the Goose until you see the box going into the hole....
Jim Goose is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2011, 07:21 AM   #3
wrongwaynorris
FF.Com.Au Hardcore
 
wrongwaynorris's Avatar
 
Join Date: May 2006
Location: Sydney
Posts: 1,868
Default Re: Automotive lighting

The current generation of 50 plus 80 plus and 100 plus do NOT draw any more current . They use a different gas in the bulb to get the extra lux and lumens .
wrongwaynorris is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2011, 07:58 AM   #4
sudszy
Banned
 
Join Date: Jan 2011
Posts: 776
Default Re: Automotive lighting

interesting question, Ive never experienced any noticeable dulling of halogen globes as they get older, not like the old sealed beams which could get more yellow as the filament evaporated and deposited itself on the lens of the lamp, that's the purpose of the halogen, to stop that happening.

Perhaps you do need to verify if they are indeed duller, get an identical replacement globe and compare, it may be the lenses on your lamps that are the issue, or that the wiring has deteriorated( low chance). Wiring in good condition should show a voltage drop of less than one volt between the +ve terminal of the battery and the +ve terminal of the lamp when the lamp is operating. Also test the voltage between the -ve terminal of the lamp and the -ve of the battery,(when its operating), there should be zero difference here....otherwise problem in earthing of headlight wiring.

If it proves to be the globe that has got duller, does the globe itself appear to have a deposit on it?
sudszy is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2011, 08:05 AM   #5
vanman_75
XD Sundowner
 
vanman_75's Avatar
 
Join Date: Aug 2007
Location: moranbah
Posts: 1,078
Default Re: Automotive lighting

My theory is they should get brighter as they age and the filaments slowly get thinner , I would guess voltage drop , either wiring / battery / alternator and a little in reflector deterioration.
__________________
something old something blue
vanman_75 is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2011, 09:21 AM   #6
Yellow_Festiva
Where to next??
 
Yellow_Festiva's Avatar
 
Join Date: Oct 2006
Location: Sydney
Posts: 8,893
Default Re: Automotive lighting

I think you have just got used to them Damo? Pop in your old globes for a week or 2 then replace them with the new ones you think have dimmed.

See if they appear ultra bright again like you imagined they were when you first installed them.
Yellow_Festiva is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2011, 10:01 AM   #7
kempy311
BEN
 
kempy311's Avatar
 
Join Date: Jun 2011
Location: Perth WA
Posts: 4,875
Default Re: Automotive lighting

Yer as said before they dont pull and extra wattage its just the different gas in the globe, tighter wrapped filaments and different shape glass.

Stick in some new plus 100 and see if they are brighter i would say as they get older they would get duller.
__________________
My Thread. The new whip: 2014 FGX XR8 Auto in victory gold. Mods : BMC air filter, 1500cc injectors, Walbro 485, 58mm kpm snout, kpm intercooler, 35% front and 20% rear tint, pedders supercar coilovers, whiteline sway bars, Phillips HIDs, lenso d1r wheels.
331rwkw.
12.7 sec stock as a rock with a passenger.
Now with 620rwhp ready to run the 10

built zf, built tailshaft, corn juice all to come.

The old rig: 2008 FG XR8 Auto in dash green with a tonne of mods to make 311rwkw.
kempy311 is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2011, 10:06 AM   #8
2011G6E
FF.Com.Au Hardcore
 
2011G6E's Avatar
 
Join Date: Feb 2011
Location: On The Footplate.
Posts: 5,086
Default Re: Automotive lighting

Quote:
Originally Posted by Yellow_Festiva
I think you have just got used to them Damo? Pop in your old globes for a week or 2 then replace them with the new ones you think have dimmed.

See if they appear ultra bright again like you imagined they were when you first installed them.
Unless there is indeed a fault with the bulbs, I believe that's your answer right there. Simple "familiarity breeds contempt". You really notice the brightness when you purchase them and for some time afterwoods, but it's just human nature to get used to something the more you see it, and after a while you won't notice it anymore.
2011G6E is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2011, 12:08 PM   #9
demood
Regular Member
 
demood's Avatar
 
Join Date: Mar 2005
Location: Gunning, NSW
Posts: 49
Default Re: Automotive lighting

Make sure you lenses are clean too, you'd be suprised how much difference that can make!
demood is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2011, 03:59 PM   #10
FTE72
Red is nice Mark.
 
FTE72's Avatar
 
Join Date: Apr 2006
Location: Brisvegas
Posts: 1,385
Default Re: Automotive lighting

They will get a little dimmer with age(don't we all?) due to the breakdown of the filament being deposited and coating the inside of the lamp(not headlight assembly).
Have a look at any old halogen lamp or even old sealed beam, you might notice a silvery appearance. All lamps have rated life, they may last longer but generally the rated life means how long it will output at stated luminance.
__________________
Twin T3's
TE 50 #72 Blueprint & TS 50 #105 Blueprint
:
FTE72 is offline   Reply With Quote Multi-Quote with this Post
Old 21-07-2011, 07:29 PM   #11
Franco Cozzo
Thailand Specials
 
Franco Cozzo's Avatar
 
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,629
Default Re: Automotive lighting

Quote:
Originally Posted by Yellow_Festiva
I think you have just got used to them Damo? Pop in your old globes for a week or 2 then replace them with the new ones you think have dimmed.

See if they appear ultra bright again like you imagined they were when you first installed them.
This is probably it LOL.

Its either that or because I haven't washed my car for ages that dirt is on the covers.

Thanks for the tips though, I'll check Dad and Mum's car for voltage drop because their lights suck big time compared to mine, could be reflector design though.
Franco Cozzo is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 02:36 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL