|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-11-2011, 08:40 PM
|
#1 | ||
|
Regular Member
Join Date: Mar 2007
Posts: 195
|
Many years ago my mechanic used an a/f ratio meter to tune my auone. I have just had one built for me and I would like to know where under the bonnet do I plug it in? The AU is late 99 model.
|
||
|
|
|
06-11-2011, 09:09 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 6,359
|
For it to be any good you'll need to add a wideband sensor and controller to your car.
If you are interest in if its running lean, rich or stoich and dont care how lean or rich then wire it into your current gauge at the ECU. It wont just plug in.
__________________
Turbo AU ute ~ Nice legs, shame about the face. 282rwkw at 15psi. |
||
|
|
|
|
06-11-2011, 11:45 PM
|
#3 | |||
|
5.6L x 2 pilot
  
Join Date: Dec 2009
Location: Canbra
Posts: 15,065
 
|
Quote:
As Dan mentioned, you will need a wideband sensor and at minimum software, or a gauge to monitor it. Great timing, as I have just installed a wideband into my car, replacing one of the narrowband (right bank on V8) sensors. I highly recommend an Innovate LC-1. http://www.innovatemotorsports.com/products/lc1.php or as a kit with a gauge http://www.innovatemotorsports.com/x...cat=273&page=1 Plenty of options on their website - check them out. Sorry, it is not as simple as 'where do I plug it in'. Good luck Stu
__________________
2002 AU II LTD 5.6L 342ci T3 Short, AFR165 heads, Comp XE270HR-12 Cam, Brembo 4/4s(355/330), T3 5 spokes, LC-1 wideband, Whiteline HD swaybars, TCE 3K Hi Stall, PWR Auto Trans Cooler, Koni shocks, King Low Springs, Hurricane headers, 100 cpsi cats, Twin 2.5" exhaust. Quarter Mile: 13.73 @ 105.86mph Runner Up NA/DA to BF Fairlane/LTD Geelong AFD 2024  2002 XR8 pursuit 250 Custom twin 2.5" exhaust w Herrod modifed extractors, Tuned with Moates QH
|
|||
|
|
|
air/fuel ratio meter
Linear Mode
