|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
30-03-2006, 02:14 AM
|
#1 | ||
|
Starter Motor
Join Date: Oct 2005
Posts: 23
|
I have to change the main headlamp globe on my AU2. Various handbooks say
pull the electrical plug whilst others say squeeze the sides of the plug and then pull. Being 500 years old, I do not seem to have the strength to squeeze and pull at the same time. Which is right? Russell |
||
|
|
|
30-03-2006, 03:37 AM
|
#2 | ||
|
they call me Tibbo
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
|
YEs, squeeze the tabs (at 3 and 9 o'clock) and then pull the connector off.. If you are really stuck or the connector is being stubborn undo the earth retainer clip and lift the bulb out where you can see it.. Sometimes you need to wedge a little flatblade screwdriver in between the bulb to level it out..
__________________
|
||
|
|
|
Headlamp globe changing on AU2
Linear Mode
