|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
18-04-2022, 12:32 AM | #1 | ||
Starter Motor
Join Date: Apr 2022
Posts: 1
|
G'Day
I have a 2006 ford focus hatch 2.0L (auto). It has approximately 210 000 KM's so its no spring chicken. It has an odd problem of having the drivers side brake light always being dimmer then then passengers side. You can tell its still working only at night only thats how dim it is. I changed the bulbs, ran a diagnostic but no luck. Can some one suggest any ways to rectify? I was thinking..1) perhaps a ground issue so cut the ground and re-ground it some where else? 2) daisy chain or link it to the working brake light that isnt dim (but unsure if that will dim that out too?) Or 3 change the socket for the brake light globe? Any ideas? Cheers |
||
18-04-2022, 09:08 AM | #2 | ||
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,720
|
I had the same problem with my 2006 LS Focus on the drivers side. Had to remove the tail light (3 torx screws) and found that the connector to the brake light earth pin was slightly corroded and opened. Cleaned it up and closed up the gap of the earth wire, all good. If its not that on yours its an issue with the earth somewhere.
|
||
This user likes this post: |
20-04-2022, 06:06 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,720
|
If what I suggested does not work, you may also need to replace the brake light globe socket itself, part number XS4113K370CD. Can help get one if need be.
|
||