Roller doors and keeping dust out

[syco26]

Anyone got any good ideas you have used in your garages to minimise dust entry around roller doors?

Have looked at the brush seals however I live in sand dune country and don’t want the dirt between the brush seals and the roller doors sanding all the paint off the doors.

Seen a good one on the top of a roller door where the brush seal was riveted to the actual door. That way the seal closed the gap when the door was all the way down and not actually rubbing on the door the whole time it is going up.

Have googled this topic a fair bit but can’t find much besides the brush or foam seals. Any ideas would be greatly appreciated.

[OneMadMan]

Howdy Mr, happy new year to BTW,

Mate, I did this for a living back in the early 90's, and I can honestly say that I am stumped.

The only answer I have is to maybe select a finish that's not susceptible to scratching and use a brush strip.

I, like you, have Googled this exact same scenario, and like you, have drawn a blank.

Food for thought...



Cheers,

One Mad Man

[HIPO]

Thats about as good as it gets unfortunately, same probs here, even with the cars covered or tented still the whole place is soon covered with sand & dust...... pressurising is the only sure fire method i know & thats after sealing as well as practical.